Advanced Medical Equipment Homogenizer Mixer for | RFQ Sourcing Details
Tractors And Implements · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Tractors And Implements. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
I.Basic Working Principle By vacuum suction (or artificial feeding) into the conical container of the material through the mixing of the binder added in the modified stirrer under the action of the ring, radial, axial movement, fully mixed, and then by the granulation cutter cut into uniform texture, dense spherical particles.
(The following schematic diagram) II. Application III. Equipment Composition, Main Structure, and Materials 1. Composition The machine is mainly composed of the chassis, covered container, mixing system, cutting system, discharge device, control system, and water-gas system. (As shown in the figure below) IV.
Main Structure and Materials 1. Chassis: Made of welded steel, the frame is covered with stainless steel plates. The chassis frame is divided into upper and lower parts. The bottom is equipped with adjustable support feet and vibration damping pads.
The upper frame supports the covered container, mixing system, cutting system, and discharge device. The lower frame mainly carries the reducer, motor, and transmission system. The electrical control motherboard is placed inside the lower frame. Frame material: Q235-A.
Three sides are equipped with protective cover plates, and the other side is equipped with a movable door made of protective cover plates. Material: SUS304. 2. Covered Container: The container is inverted conical, with a stirrer installed at the bottom center and a granulation cutter on the side.
The upper part has a quick-opening cover;the quick-opening cover consists of a cover, cover fixing arm, cover rotating arm, and cylinder. The cover is equipped with a feed port, sight glass, and exhaust device. Material: SUS304. 3.
Mixing System: Composed of a motor, frequency converter, reduction device, transmission shaft, modified Bumar-type stirrer, compressed gas sealing device, and rotating air gap seal. Material: 45#/SUS304. 4.
Cutting System: Composed of a motor, frequency converter, transmission components, multiple U-shaped cutting blades, and gas sealing components. Cutting System 5. Discharge Device: Composed of a discharge seat, discharge plug, discharge port, and guide rod. 6.
Control System: Composed of a PLC programmable controller, complete electrical components, pneumatic components, and a human-machine interface operation screen. V. Main Performance Characteristics 1. Chassis 1.1 Surface matte treatment, high
Advanced | Applications and Buyer Notes
Advanced is organized as a sourcing-ready Tractors And Implements reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Tractors And ImplementsBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- interface
- operation screen. V. Main Performance Characteristics 1. Chassis 1.1 Surface matBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1 2 3 4 Butterfly Rotary Sprinkler Garden Irrigation Sprayers Lawn Watering Sprinklers Garden IrThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Feed And Grain Processing categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Irrigation And Greenhouse categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Planting And Harvesting categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tractors And Implements categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Irrigation Equipment Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1 2 Inch Magnet Sprinkler Oscillating Sprinkler For Garden Farm 360 Degree Plant Tool Garden IrrThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1 6 M Tractor Powered Rotary Tiller For Soil PreparationThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Agricultural Machinery Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Feed Pellet Machine Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100 New Material Customizable Cylindrical Drip Lines Tape For IrrigationThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Tractor-Mounted Ditching Implement for Walking TractorsRequest Quote
SAMTRA TZ03D Euro Hitch Tractor Front End LoaderRequest Quote
1GZN-300 Tractor-Mounted Combined Rotary Tillage ImplementRequest Quote
910-5.0 Extra-Heavy-Duty Trailed Disc Harrow with 910 mm Notched BladesRequest Quote
Light-Duty No-Till Planter Row Unit Assembly with Four-Bar Linkage and 60 L Seed BoxRequest Quote
18 HP / 20 HP Two-Wheel Diesel Walking TractorRequest QuoteAgroMachHub related sourcing paths
AgroMachHub procurement phrases
AgroMachHub related product samples
The light-duty no-till single unit assembly 1. The main body, four-bar linkage, and press wheel frame are made of nodula...
Tractors and Implements Walking Tractor, Power Source : FuelHelping in towing and driving applications, the Walking Tractor offers easier operations and lower maintenance. The Walk...
Tractors and Implements Steel Walking Tractors, Power Source : Diesel EngineWe offer top-quality new Walking Tractors made of durable steel, packaged in a secure cardboard box. Ideal for plowing, ...
Tractors and Implements Walking Tractor for FarmingOur company is one of the leading Walking Tractor Importers and Suppliers in India. The Walking Tractor, which we provid...
Tractors and Implements Hot Sale 80HP Wheel Drive Tractor Farm Tiller Wheeled Cultivator Tractors Orchard Cultivation WheeleWelcome to Shandong Skott-Rotary Tractor Customized Agricultural Tractor Equipped with a well-known diesel engine, it ha...
Tractors and Implements Semi-Automatic Motor Operated Paddy Thresher 32 InchWe offer the PT32 Motor Operated Paddy Thresher, a 32-inch machine with semi-automatic grade, ideal for threshing paddy....