CHT Brand Automatic Air Separator | RFQ Sourcing Details

ZKF Series Automatic Air Separator The ZKF series automatic air separator is a device that can automatically and continuously separate non-condensable gases (mainly air) from the refrigeration system and discharge them out of the system.

Performance Parameters Performance Parameters Refrigerant R717 Product Models ZKF-4, 8, 10, 12, 16, 24 Discharge Points 4, 8, 10, 12, 16, 24 Design Pressure 20 MPa Design Temperature 50°C Voltage 220V Power 0.3-0.5 kW Overall Dimensions 600X655X1245 Package Dimensions 680X730X1400 Net Weight 127 Kg Gross Weight 177 Kg Definition of the operation interface: Stand - by time: The set value is 24h.

After the equipment has been inspected for a week and the exhaust valve has not been opened, the equipment enters the stand - by state. After the "stand - by time", the equipment enters the next round of inspection. Intake time: The set value is 5m. It is the maximum intake time for a single intake valve.

If the time is exceeded, the exhaust stage will be entered. Exhaust time: The set value is 20m. After the exhaust valve is opened, if the shell - side pressure is still greater than the set pressure after the "exhaust time", a fault of the exhaust valve will be reported. Non - exhaust time: The set value is 72h.

After the equipment is put into operation and started, if the exhaust solenoid valve has not been opened within the "non - exhaust time", a non - exhaust fault will be output. Liquid supply opening delay: The set value is 1m. When the equipment is started, the liquid supply solenoid valve is opened first.

After the "liquid supply opening delay", the intake solenoid valve is inspected and vented. Temperature setting: The set value is 5. When the intake valve solenoid valve is opened, if the shell - side temperature is lower than the set temperature 60s later, the exhaust stage will be entered.

Pressure setting: The set value is 0.4MPa. After the exhaust valve is opened, when the shell - side pressure is lower than the set pressure, the exhaust stage ends and the next cycle is carried out.

Product Category Industrial Refrigeration Equipment Evaporative Condenser Refrigeration Pump Refrigeration Valve Stop check valve Check Valve Regulating Valve/Control Valve Stop Valve Solenoid Valve Filter Pilot Valve Main Valve Pressure Regulators Gas Powered Stop Valves Overflow Valve Temperature Regulating Valve Quick Drain Valve Liquid Level Switch AKS38 Small Valve Safety Valves Air cooler & Evaporator Low-pressure circulation barrel pump unit Low-pressure circulation receiver Automatic air separator Sight Glass Cooling Towers & Fluid Coolers Closed Circuit Cooling Tower Open Type Cooling Tower Adiabatic Fluid Coolers & Dry Cooler Parts & Service Forced Draft Type Evaporative Condenser Counter Flow Type Evaporative Condenser Centrifugal Fan Type Evaporative Condenser Cross Flow Type Evaporative Condenser Related Products HANSEN Brand Automatic Air Separator The automatic air separator is a unique energy - saver.

It can effectively separate and expel non - condensable gases (mostly air) in the refrigeration system, lowering condensing pressure, increasing cooling capacity, saving electricity, and reducing refrigerant leakage due to manual air - venting. Navigation Home