Sawtooth Ventilation Multi-span Film Greenhouse_Shouguang Zenong Greenhouse Engineering Co., Ltd.

HOME ABOUT PRODUCTS&PROJECT SERVICE NEWS PARTER CONTACT PRODUCTS&PROJECT mainbusiness LOCATION： HOME PRODUCTS&PROJECT Sawtooth Ventilation Multi-span Film Greenhouse TEL： 08613336367872 Sawtooth Ventilation Multi-span Film Greenhouse Editor：zenong Time：2021-10-28 Hot： ℃ The sawtooth type greenhouse has a modern appearance, novel structure, stable structure, smooth vision, strong light transmittance, up to 90%, and strong wind and snow resistance.

Ventilation in the middle of each span of the greenhouse can be used for ventilation in a large area. At the same time, due to the principle of hot differential pressure, the gas with high temperature in the greenhouse is always at the highest point of the greenhouse, so the natural ventilation of the traditional greenhouse can be changed. Effectively reduce the temperature and humidity in the greenhouse, especially suitable for flowers and crops with low humidity requirements.

Multi-Span Poly Film Greenhouse with Shading/Irrigation/Cooling/Ventilation Equipment 1.Introduction of Product • Hot dip galvanized frame This kind of special treated steel has good anti-corrosion and anti-rust effects, which extend the service life of the greenhouse. Special designed structure and accessories make sure the outstanding performance of the greenhouse.

• High quality covering material With more than 80% light transmission and low cost,the PE is one of the best material to be widely used in the greenhouse.

2.Product Parameters Specification of greenhouse Production name Multi-span plastic tunnel greenhouse Length 60-200m,customize Span Width 9.6m 10.8m 12m Roof height 3-6m,can customized Greenhouse farme Hot galvanized steel pipe,diameter is 25mm,32mm,40mm,42mm,50mm,60mm Cover film PE/PO 0.12/0.15/0.2mm,customize Ventilation Two sides ventilation by manual/electric roll up machine Wind load 80-130km/h Snow load 0.5KN/M2 Plants hanging load: 0.15KN/m2 Rain drainage 140mm3/h Option Cooling fan,cooling pad,shade net,heater,lights,irrigation system 3 .Product Show and Application 4.Perfect Accessories 5.Greenhouse Engineering Material 6.Customer Visit 7.Our Company Shouguang Zenong Greenhouse Engineering Co., Ltd is located in the origin of greenhouse-Shouguang, a beautiful city with convenient transportation in shandong province.

It is about 150km from Qingdao port. Zenong is a specialized greenhouse engineering company integrating design, production and installation for 20 years. We have four domestic top-level greenhouse skeleton production lines, with an annual output of about 150,000 tons of galvanized skeleton parts. All of our employees have been professional trained, to provide our customers with best quality greenhouse, high planting technology and perfect after-sales service.

8.Our Advantage 1)Our company has 20 years engineering experience, domestic top technical team, strict control of quality, and we provide technical services as customer requirement. 2)We have our skeleton factory, ensure the product best quality and competitive price. 3)The greenhouse is easy to install and maintain, and size can be customized. 4) We have Strong Technology Team:Professional R&D center guarantee top quality and advanced reliable design for each project.

5) Good after-service: We could send engineer go abroad for correct installation, horticultural service and other service for you. 9.Realted Products 08613336367872 [email protected] Shouguang, Weifang, China Copyright © Shouguang Zenong Greenhouse Engineering Co., Ltd. Add：Shouguang,Weifang,Shandong,China Tel：08613336367872 YUNCHUANGCMS